This is documented issue and the pressures have been verified http://www.airproducts.com/Responsibility/EHS/ProductSafety/ ProductSafetyInformation/safety_bulletins_PotentialPressurization.htm Quoting Jay Young: > I fail to see how gaseous HF can react with steel to produce an excessive > hydrogen pressure and burst a cylinder: > 6HF + 2Fe yields 2FeF3 + 3H2 > The product would be FeF3, not FeF2, because fluorine is an excellent > oxidizing agent. Consequently, if anything, the gas pressure inside the > cylinder would necessarily be reduced as the HF attacks the iron of the > cylinder. > > It's obvious that the cause of the explosion was the thinning of the > cylinder wall at one or more locations, NOT the pressure of the hydrogen. > > Jay Young > > PS: Alas, in these modern times, these young folks just don't know their > descriptive chemistry like us old guys do. I predict disaster and > catastrophe--as we old guys die off, the world will be left with chemists > who don't know descriptive chemistry. Alas and Alak! (or whatever) > > ************************************************************************* > ********************************** > > On Fri, 8 Jul 2005 15:42:58 -0700 Debbie Decker > writes: > > Hi gang: > > > > From our intranet for your information. If you want copies of the > > photos, > > lemme know. > > > > BTW, I did have a potentially scary situation with HBr in lecture > > bottles - > > quite ancient stuff. It has a similar nasty habit of > > over-pressurizing > > over time. It was managed without incident, several $10K later. > > > > Ya'll be safe, > > Debbie > > > > > > >Priority: NORMAL > > >X-Mailer: Execmail for Win32 5.1.1 Build (10) > > >X-Scanned-By: MIMEDefang 2.49 on 169.237.104.156 > > >X-Scanned-By: MIMEDefang 2.51 on 128.111.125.200 > > >Date: Fri, 8 Jul 2005 13:55:39 -0700 > > >Reply-To: UCIH Program Management Group > > > > >Sender: UCIH Program Management Group > > >From: Kevin Kaboli > > >Subject: recent lab explosion > > >To: SBUCIH-L**At_Symbol_Here**LISTSERV.UCSB.EDU > > > > > >Hi Folks, > > >FYI-Here is the report of the explosion by Dave Vandenberg: > > > > > >Best > > >Kevin > > > > > > > > > > > >UC EH&Sers: Below is a note describing an accident that occurred > > recently > > >on our campus. You may already be aware of this potential safety > > issue > > >with hydrogen fluroride cylinders. If not, would recommend that > > you > > >identify and dispose of old cylinders of this material. We were > > fortunate > > >that no one was injured in this accident. Feel free to contact me > > with any > > >questions about this incident, but I will be away next week. > > > > > >- Dave Vandenberg, UCSB Laboratory Safety Manager > > > > > > > > > > > >This past Sunday evening (7/3/05) an old gas lecture bottle > > cylinder of > > >anhydrous hydrogen fluoride spontaneously exploded within a gas > > cabinet on > > >the first floor of the Chemistry building. Thankfully, no one was > > injured > > >because no one was in the room, or adjoining spaces. However, > > given the > > >extensive damage to the lab, it is likely that anyone present would > > have > > en seriously injured from flying debris and/or HF exposure. The > > >explosion also resulted in the building being locked down for about > > 12 > > >hours by the Fire Department. > > > > > >Attached are pictures showing the remains of the lecture bottle and > > a shelf > > >about 10 feet away where the heavy-duty window from the gas cabinet > > can be > > >seen after it was hurled. > > > > > >Anhydrous hydrogen fluoride in carbon steel cylinders may react > > slowly over > > >years with the iron in the steel to form iron fluoride and > > hydrogen. The > > >hydrogen pressure can ultimately build to the point where it > > ruptures the > > >cylinder. This is discussed more fully on the bottom of pg. 5 of > > this MSDS > > >from Air Products: > > > > > >http://www.airproducts.com/MSDS/searchresults.asp > > > > > >Given this potentially serious hazard, WE ASK THAT EACH RESEARCH > > GROUP > > >VERIFY WHETHER THEY HAVE ANY GASEOUS HYDROGEN FLUORIDE IN STOCK. > > If some > > >is on hand, please do not move it, but inform EH&S at x-4899 > > (after Friday > > >call x-3293). Each cylinder will be evaluated individually as to > > it's > > >condition and ultimate fate. > > > > > >Thanks for your cooperation. > > > > > > > > > > > >---------------------- > > >David Vandenberg > > >Laboratory Safety Specialist > > >UCSB Env. Health & Safety > > >(805) 893-4899 > > >David.Vandenberg**At_Symbol_Here**ehs.ucsb.edu > > >--- End Forwarded Message --- > > > > > > > > >---------------------- > > >Kevin Kaboli, MA, MS, CIH > > >Industrial Hygiene Program Manager > > >University of California > > >Santa Barbara, CA 93106 > > >Kevin.Kaboli**At_Symbol_Here**ehs.ucsb.edu > > >(805)893-8787 > > >(805)893-8659 FAX > > > > > > > > > > > > > > -- Joseph R Passante, CIH, CHO Industrial Hygiene Manager Environmental Health & Radiation Safety University of Pennsylvania 215.746-6550 215-898-0140 (F) 215-651-0554 (M)
Previous post | Top of Page | Next post