From: Mark Bachrach <markbachrach2015**At_Symbol_Here**U.NORTHWESTERN.EDU>
Subject: [DCHAS-L] Surgical Mask Disinfection with Ionized Hydrogen Peroxide (SteraMist)
Date: Mon, 30 Mar 2020 12:29:24 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: CADv-0JaB_o+QTwER9=E2V7iRYu03QeqRBDCmM-TX=jvDGvb5ug**At_Symbol_Here**mail.gmail.com


Hi All,

Is anyone using the Ionized Hydrogen Peroxide Steramist system to disinfect surgical masks that contain a cellulose inner layer? Based on a previous study (https://tomimist.com/wp-content/uploads/2018/03/Surface-Compatibility-and-the-SteraMist-Systems-2.pdf), there should not be any compatibility issues with surgical masks that have a polypropylene inner layer. I do not think there should be the same issues present with the Vapor Phase Hydrogen Peroxide systems and cellulosic materials since the hydrogen peroxide concentration is much lower and there is minimal residence time due to more rapid H2O2 decomposition in the ionized systems (https://www..labrepco.com/wp-content/uploads/2018/09/Ionized_Hydrogen_Peroxide__iHP____vs._Vaporized_Hydrogen_Peroxide__VHP____1427129030.pdf). Do you anticipate there will still be some degradation of the cellulosic inner layer from the short-lived ions and radicals?

Thanks.

Regards,
Mark
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.