About This Archive  | DCHAS-L 2016 Index   | DCHAS-L Yearly Index
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
Subject: Re: [DCHAS-L] Pressure release requirements on laboratory waste containers?
Date: Tuesday, January 26, 2016 12:59:12 PM
Author: Kyle J. Angjelo <kangjelo**At_Symbol_Here**PRINCETON.EDU> 		Next by Date:
Subject: Re: [DCHAS-L] Pressure release requirements on laboratory waste containers?
Date: Tue, 26 Jan 2016 18:50:44 -0500
Author: Bruce Van Scoy

From: "Simolo, Ken" <simolo**At_Symbol_Here**UR.ROCHESTER.EDU>
Subject: Re: [DCHAS-L] Pressure release requirements on laboratory waste containers?
Date: Tue, 26 Jan 2016 18:45:49 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: EC4D8124-1036-494E-BB26-8681F141B27F**At_Symbol_Here**ur.rochester.edu
In-Reply-To


For collection, we use the CP Safety eco funnel  http://www.calpaclab.com/about-the-eco-funnel/


We had pressure reliefs installed on the lids.  Normally they install them on the sides but we were concerned with clogging.  The lids will also pop before the pressure is so great that the bottle would rupture.  The vent is only as safety precaution in case something was not quenched properly.  Nothing is routinely vented.  I can not say that anything has ever come out of the vents.  

Ken

Previous post   |  Top of Page   |   Next post


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.