From: "Reuter,Mike - Dairy One" <Mike.Reuter**At_Symbol_Here**DAIRYONE.ONMICROSOFT.COM>
Subject: [DCHAS-L] Safety Shower Installation
Date: Wed, 11 Mar 2015 16:06:38 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: DM2PR0601MB1023AEC9578268BB8954EE6CC8190**At_Symbol_Here**DM2PR0601MB1023.namprd06.prod.outlook.com


Good afternoon,

 

Quick query.  We have a new building with labs under construction and near the final phases.  Ammonium Hydroxide (corrosive) will be used in a ventilation hood in one of the lab rooms.  There is a sink mounted eyewash planned but I just found out that no provisions were made for a safety shower.  This has now been brought to the attention of the construction group but unfortunately there is no floor drain in that lab room and it’s beyond the point where one could be installed.  The group is suggesting a location for the shower that is accessible within 5 seconds of where the chemical will be used but the individual would have to proceed through a swinging door.  Under ANSI Z358.1 a door is considered an obstruction for corrosive hazards.  Would a swinging door still be considered an obstruction?  Any advice would be great.

 

Thanks,

 

Mike

 

Michael J. Reuter

Forage Lab Chemist

Health and Safety Director

 

Dairy One

730 Warren Road

Ithaca, NY 14850

Phone: 1-607-257-1272, ext. 2166

Fax: 1-607-257-1350

email: mike.reuter**At_Symbol_Here**dairyone.com

 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.