You might want to contact the US DOE. They have methods in place for shipping highly radioactive solids and fluids, many of which are also highly corrosive. Their containers might be adaptable for your purpose if there is no issue of chemical incompatibility.
Michael Kleinman, Professor
University of California Department of Medicine
Division of Environmental and Occupational Medicine
100 Theory
Ste 100
Irvine CA 92697-1830
949-824-4765 Phone
949-824-2070 Fx
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**med.cornell.edu] On Behalf Of Zack Mansdorf
Sent: Thursday, February 19, 2015 11:23 AM
To: DCHAS-L**At_Symbol_Here**med.cornell.edu
Subject: Re: [DCHAS-L] [UK OFFICIAL] Transport of dangerous chemicals
I am pretty familiar with Edgewood from my days there in uniform. This could be more complicated than just a highly toxic material. If the discussion would not be classified, I might suggest you contact Andy Altemos at HMT Associates. He is a leading expert in hazardous materials shipping (has a shipping consulting business) whom I have worked with (fee for service).
Good luck
S.Z. Mansdorf, PhD, CIH, CSP, QEP
Consultant in EHS and Sustainability
7184 Via Palomar
Boca Raton, FL 33433
561-212-7288
From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Margaret Rakas
Sent: Thursday, February 19, 2015 10:59 AM
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Subject: Re: [DCHAS-L] [UK OFFICIAL] Transport of dangerous chemicals
Dear Dr. Williams,
You may want to contact air-sea.co.uk
+44 (0) 151 653 1500
They provide packaging for regulated materials and perhaps either can help you or send you to another vendor. I use their affiliate in the US and once I have classified the shipment, they are very willing to work with me to find the right type of packaging. We have some samples that are not in the usual type of container and they have some very innovative packaging which has been helpful to us.
Good luck!
best,
Margaret
On Thu, Feb 19, 2015 at 10:26 AM, Williams Gareth R <GRWILLIAMS**At_Symbol_Here**mail.dstl.gov.uk> wrote:
Classification: UK OFFICIAL
Handling Instruction: OPEN SOURCE - This email contains information that is available from open sources
Fellow scientists and safety professionals across the pond,
I work for the Defence Science and Technology Laboratory (part of the UK Ministry of Defence). We are essentially the UK version of DoD's Edgewood Chemical & Biological centre.
It doesn't take much imagination to know that we work with quantities of high-hazard, acutely toxic materials, all of which fall under GHS Acute Toxicity Class 1.
My question is, how do I find a suitable UN approved container to transport 5g of an acutely toxic solid and 5g of an acutely toxic liquid from our synthesis laboratories to our analytical facility. We used to use bespoke containers, but these are no longer an option as we cannot demonstrate that they are fit for purpose. We would therefore like to source a commercial solution.
Any ideas?
Grateful for any help,
Gareth
Gareth R. Williams PhD
Dstl Porton Down
United Kingdom
"This e-mail and any attachment(s) is intended for the recipient only. Its unauthorised use, disclosure, storage or copying is not permitted. Communications with Dstl are monitored and/or recorded for system efficiency and other lawful purposes, including business intelligence, business metrics and training. Any views or opinions expressed in this e-mail do not necessarily reflect Dstl policy."
"If you are not the intended recipient, please remove it from your system and notify the author of the email and centralenq**At_Symbol_Here**dstl.gov.uk"
--
Margaret A. Rakas, Ph.D.
Manager, Inventory & Regulatory Affairs
Clark Science Center
413-585-3877 (p)
Previous post | Top of Page | Next post