Thanks for the informative references and guidance on grounding and bonding.  In addition to the information shared, it seems NFPA 77 and 29 CFR 1910.106 both address the issue.  We will be reviewing the information with an eye towards developing a guidance document for our folks.  I also really liked the poster and will definitely be ordering one or two!

Cheers

Keane

This really depends. What exactly are you trying to do? If you're running an electric current though something then rubber is going to be your best insulator/grounder.  As for a bonding material, this depends. You should be able to use almost any metal depending on its availability and the going rate of the metal. Just keep in mind the melting points and your safety. 

From: "Keane J. Leitch" <kjl44**At_Symbol_Here**CORNELL.EDU>
Date:09/09/2014 8:35 AM (GMT-07:00)
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Cc:
Subject: [DCHAS-L] grounding and bonding of metal solvent containers

Hi ,

I am looking for guidance on the appropriate method for grounding and bonding metal solvent containers such as 55 gallon drums or 5 gallon cans?

 

Thanks

Keane

 

"Individual commitment to a group effort--that is what makes a team work, a company work, a society work, a civilization work." -Vince Lombardi

 

Keane Leitch, MPS, CCHO, RBP

Safety Manager

Physical Sciences Facilities Management

121 baker Lab

Ithaca, NY 14850

607-255-8773 (Office)

607-255-4137 (Fax)

607-592-7079 (Mobile)

Keane.Leitch**At_Symbol_Here**cornell.edu/kjl44**At_Symbol_Here**cornell.edu