From: Bill Blair <billblair19**At_Symbol_Here**YAHOO.COM>
Subject: Re: [DCHAS-L] demolition of lab with osmium tetroxide contamination
Date: Tue, 6 Aug 2013 11:36:29 -0700
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 1375814189.68068.YahooMailNeo**At_Symbol_Here**web142703.mail.bf1.yahoo.com
In-Reply-To


These nitrile gloves can be brittle so, depending on thickness, you may want to wear a double pair when lifting and moving frames with edges. Perhaps try a test without hazards and see if your gloves fit the generalities of intended use.


From: Ellen M. Sweet <ems325**At_Symbol_Here**CORNELL.EDU>
To: DCHAS-L**At_Symbol_Here**MED..CORNELL.EDU
Sent: Monday, August 5, 2013 3:29 PM
Subject: [DCHAS-L] demolition of lab with osmium tetroxide contamination

=0A
=0A=0A =0A =0A=0A=0A
=0A
=0A
Hi everyone,
=0A
I=E2=80™d like to know if anyone has dealt with the demolition of a lab and removal of a fume hood in which osmium tetroxide was used? Other than recommending respiratory protection (N100 or P100 cartridges), nitrile gloves and coveralls during=0A tear-out, are there any other precautions we should keep in mind?
=0A
Thanks for any suggestions.
=0A
Ellen
=0A
 
=0A
Ellen Sweet
=0A
Laboratory Ventilation Specialist
=0A
Department of Environmental Health and Safety
=0A
Cornell University
=0A
315-730-8896
=0A
 
=0A
=0A
=0A


Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.