From: 8524828hau**At_Symbol_Here**COMCAST.NET
Subject: Re: [DCHAS-L] Cylinder question
Date: January 17, 2012 5:18:11 PM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <CB3B9263.A0BA%brandon.chance**At_Symbol_Here**qatar.tamu.edu>



1. Examples of requirements at academic institutions as based on numerous regulations, codes, and standards.
http://www.umdnj.edu/eohssweb/publications/compressedgas.pdf

http://www.stanford.edu/dept/EHS/prod/mainrencon/Labdesign/Section_1-3_Pressure_Vessel_and_Compressed_Gas_Cylinders.pdf?cache=0

A Google search for compressed gas cylinders in laboratories generates many academic-based requirements that cite NFPA 45.

2. The 2000 edition (most recent 2011 edition available in PDF format for $<40 at http://www.nfpa.org/aboutthecodes/aboutthecodes..asp?docnum=45 ) is available at http://xa.yimg.com/kq/groups/9534928/74252428/name/NFPA-45.pdf.  The more recent 2011 edition (PDF) is available for $40 at (most recent 2011 edition available in PDF format for $<40 at http://www.nfpa.org/aboutthecodes/aboutthecodes.asp?docnum=45

3. For numerous OSHA letters of interpretation, go to http://www.osha.gov/html/a-z-index.html and enter the key words "compressed gas cylinder laboratory."  Although there are far too many hits to read, focus on the first page, then narrow the search at your discretion.

David Haugen (retired)


From: "Brandon Chance" <brandon.chance**At_Symbol_Here**QATAR.TAMU.EDU>
To: DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU
Sent: Tuesday, January 17, 2012 12:02:33 PM
Subject: [DCHAS-L] Cylinder question

D-CHAS Group,

I have a question regarding the use of gas cylinders on instrumentation within an academic research lab.  I am familiar with the regulations regarding storage of flammable and oxidizing gas cylinders, in particular the 20 foot rule, gas cabinet, or concrete barrier requirements.  That being said, I seem to remember learning at a training session that cylinders "in use" were exempt from these requirements. I can not find the regulation stating this, but if I remember correctly, it was written almost specifically for research labs at academic institutions and added by the regulatory authority as an "exemption" to the standard.  Can anyone point me in the right direction for this regulation?

Thanks,

Brandon Chance, M.S.

Safety and Environmental Compliance Manager
Office of Building Operations & HSSE
Texas A&M University at Qatar
brandon.chance**At_Symbol_Here**qatar.tamu.edu

PO Box 23874 | Doha, Qatar
TAMUQ Building Room 225E | Education City

(o) +974.4423.0495 | (m) +974.6668.3552 | SkypeIn USA 001.281.764.1776

www.qatar.tamu.edu

It's Time For Texas A&M

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.